Dallas Logic
 
|
|
   
NIOMITE_2C52C8


Niomite Cyclone II™ EP2C5/EP2C8 Controller/FPGA Module

Information :

The Niomite module allows implementation of FPGA logic functions and/or Altera Nios II processor operation in the smallest possible form factor.  Niomite provides the following circuits to support a small footprint FPGA based controller:

bullet

512K X 8 SRAM

bullet

EP1S4 FPGA serial loader (FPGA and Nios II boot)

Niomite modules also supports the specification (master or slave half card, 60 pin), and can interface with other modules designed to that specification.  The Niomite kit includes an FPGA programmer and power supply, and provides all the hardware items which are necessary to start designing with and evaluating the powerful features of Altera® Cyclone II FPGA devices.

Module Details :

  1. Altera EP2C5 or EP2C8 Cyclone II FPGA, in –C8 speed grade and 144 pin TQFP package.
     
  2. Separate programming ports (ASMI flash interface and JTAG interface).
     
  3. Reset and voltage monitor IC which provides 400mS reset pulse.
     
  4. Reset push-button switch.
     
  5. 44 input/output and 7 input pins available.
     
  6. 1 discrete indicator LED (green).
     
  7. Clock oscillator (25 MHz).
     
  8. compatible design.
     
  9. EPCS4 (4Mbit) serial flash for FPGA configuration (and Nios II software).
     
  10. 512K x 8 bit (4Mbit) SRAM for Nios II program execution and dynamic data storage.

Quartus II Starter Design  :

  1. Created using Quartus II ver. 6.0 SP1Nios II processor defined

  2. All module pins are defined in top level schematic project file 

  3. Memory test with results indicated to LED

  4. FPGA load from EPCS4

Note:  The starter design available for download from this website was created using Quartus II ver. 6.0 SP1.  Some user modification of the starter design may be required to support compilation under later versions of Quartus II.  Quartus II "web edition" is available for download from the Altera website.

Kit Package Contents :

  1. Niomite Cyclone II EP2C5/EP2C6 module

  2. Wall mount 3.3VDC/2A switching supply

  3. Altera ByteBlaster II FPGA programmer (USB blaster kit also available)

 


Downloads
:

Niomite User Guide
       (1.6 MB)

Niomite Design Readme
       (464 KB)

Niomite 2C8 Nios II Design QII 6.0 SP1
       (9.1 MB)

Niomite 2C5 Nios II Design QII 6.0 SP1
       (9.1 MB)

Niomite Schematic revb
       (1.4 MB)


Images :



Product Data
:

FPGA

EP2C8 EP2C5

Logic Elements (apprx. 50 gates per LE)

8256 4,608

RAM Blocks (4 Kbits + parity)

36 26

RAM Bits

165,888 119,808

PLLs

2 2

 

NIO-H-2C5-8 EP2C5 module

119.00

NIO-H-2C8-8 EP2C8 module

139.00

NIO-H-2C5-8-KB EP2C5 Byte Blaster kit

199.00

NIO-H-2C8-8-KB EP2C8 Byte Blaster kit

219.00

NIO-H-2C5-8-KU EP2C5 USB Blaster kit

349.00

NIO-H-2C8-8-KU EP2C8 USB Blaster kit

369.00


© 2002-2007 Dallas Logic Corp. All Rights Reserved.