|
Information :
The
CMI2001 module
features Micrel's KSZ8851SNL (single-port, 10/100 Ethernet PHY/MAC
controller with 50 MHz SPI interface).
The module provides
the following features:
Low profile RJ-45 connector with
integrated LEDs and magnetics.
DIP switch selectable SPI bus SSN
pin position.
DIP switch selectable IRQ (interrupt
request) pin position.
Cardstac half card module geometry
(60 pin).
The Micrel
KSZ8851SN provides the
following features:
§
IEEE 802.3/802.3U compliant MAC and PHY layer
§
SPI based control interface facilitating rapid
design integration.
§
SPI clock frequencies up to 50MHz.
§
Supports both IPV4 and IPV6 checksum generation
and checking.
§
Automatic 32bit CRC generation and checking.
§
12 Kbyte RX FIFO, 6
Kbyte TX FIFO.
Starter software (C code) is available for use with
the CMCS001 MSP430 microcontroller module. This software
will allow the user to run a complete Web Server application
using the uIP TCP/IP stack. Using this stack, it is possible to
run a variety of applications such as Web servers, E-mail
servers, Telnet and others.
The CMI2001 module supports the
specification (slave half card,
60 pin), and can interface with
other modules designed to this specification.
|
Downloads :
|
-
CMI2001 User Guide Rel. 1.0
-
CMI2001 Schematic Rev. A
-
CMI2001 TCP/IP Software Starter Design
(349 KB, targeted to
MSP430)
Note: The
software starter design contains
MSP430 source code and IAR Workbench project files. This starter design is for
reference only. Some user modification of the starter design may be
required to support compilation under later versions of
the design tools.
This starter
design is provided "as is". Modification or
support of the starter design is not included
in the purchase price.
Request Access
to these support files.
|
|
Images :
Product Data :
Unit quantity discounts are applied to your online order.
See the order page for details.
|
