|
Information :
The CMC1003 module allows
implementation of general logic functions and/or Altera® Nios II
processor operation in a compact form factor module. The module
provides the following circuits to support an FPGA based
controller:
Altera EP4CE30 FPGA
Optional 4CE115 available
64M x 16 DDR-2 SDRAM
EPCS64
FPGA serial loader (FPGA and Nios II boot)
USB 2.0 Peripheral Port (High
speed operation)
The CMC1003 module also supports the
specification (master or slave standard card, 128 pin), and can
interface with other modules designed to that specification.
The
CMC1003 kit includes an FPGA programmer and power supply,
and provides all the hardware items which are necessary to start
designing with and evaluating the powerful features of Altera®
Cyclone IV FPGA devices.
|
Module Details :
-
Altera®
EP4CE30 FPGA, in –C8 speed
grade in
484 pin
BGA package.
-
Separate programming ports (ASMI flash interface and
JTAG interface).
-
Reset and voltage monitor
IC which provides 400mS reset pulse.
-
Reset push-button switch.
-
109
input/output pins available on
stack-through header.
-
3
discrete indicator LED (red,
yellow, green).
-
Clock oscillator (25 MHz).
-
compatible design. Populated
with stack-through connector.
-
EPCS64 (64Mbit) serial flash for FPGA configuration
and Nios II software.
-
64M
x 16 bit (1024Mbit) SDRAM for Nios II program
execution and dynamic data storage.
- USB
2.0 High speed port (FT232H).
Downloads :
|
-
CMC1003 User Guide Rel. 1.0
Coming Soon
|
|
Product Data :
|
CMC1003-2M-30-8 |
EP4CE30
module |
379.00 US |
|
CMC1003-2M-30-8-KU |
EP4CE30
USB Blaster Kit |
629.00 US |
|
CMC1003-2M-115-8 |
EP4CE115
module |
779.00 US |
|
CMC1003-2M-115-8-KU |
EP4CE115
USB Blaster Kit |
1029.00 US |
Unit quantity discounts are applied to your online order.
See the order page for details.
|
