Information :

The ezFPGA proto board allows you to quickly add a powerful FPGA device to your prototype or home project.  The 1.7 x 3.0 inch module provides all FPGA support circuitry, so you can just plug and go with your own project.  The ezFPGA kit comes with Altera's Quartus II web-pack version CD which provides full compile support for Cyclone FPGAs.  The kit also provides an Altera Byte Blaster II programmer, and a power supply (USB blaster kit also available).

PCB Hardware Configuration :

1. Altera EP1C6 Cyclone FPGA.
    
2. EPCS1 serial flash (FPGA configuration and non-volatile data storage).
    
3. Dual ByteBlaster II programming ports (ASMI flash and JTAG interface).
    
4. Reset and Voltage monitor IC with reset input pin.
    
5. Up to 95 FPGA IO available on header pins.
    
6. 3 discrete indicator LED.
    
7. 24Mhz Clock oscillator.
    
8. Power input via DCJACK or module pins.

Quartus II Design Features :

1. ezFPGA-Cyclone EP1C6 module
    
2. Wall mount 5VDC/2A switching power supply
    
3. Altera ByteBlaster II FPGA programmer
   (USB blaster kit also available)
    
4. Altera "web-pack" Quartus II CD ver. 6.1

Note:  The starter design is available for download from this website. 
Some user modifications may be required to support compilation under
later versions of Quartus II.  Quartus II "web edition" software CD is
version 6.1.  Later Quartus II versions require download from the Altera website.

Kit Package Contents :

1. ezFPGA Cyclone I EP1C6 module

2. Wall mount 5VDC/2A switching supply

3. Altera ByteBlaster II FPGA programmer
   (USB blaster kit also available)

4. Quartus II 6.1 "web edition" CD

Downloads :

Images :

Product Data :